Shock absorbers on The Chevrolet Captiva C100 – which fit

     

    The second-generation Chevrolet Captiva C100 was produced from 2006 to 2011. We were going to car in eight countries. This five-door crossover is built on the GM Theta platform. Since the weight of the car in the top trim reached two tons – the load on shock absorbers is not small, you often have to wonder about their selection.

    Chevrolet Captiva front shock absorbers

    The front shock absorbers on the Chevrolet Captiva in the body of the C100 are not difficult to pick up, in the original they had several numbers, depending on the country where the car was officially supplied, and trim. Also, the front shock absorbers have a split on the left/right.

    Original numbers and the size of Captiva’s front shock absorbers in the C100.
    Article.Car / Motor.Stock diameter, mm.The diameter of the case, mm.Length in a squeezed state, mm.Length in a compressed state, mm.The stock’s work flow, um.
    Left.Right.
    LC, LD, LF, LG26, for Korea.
    LC, LD, LF, LG26, for Europe.
    L26, for Australia.

    Analogs of front shock absorbers on the Chevrolet Captiva C100

    The original shock absorbers have not proved themselves very, on average the resource is enough for 50,000 km. As a replacement, it is quite common to find on the market shock absorbers manufacturer Trialli, they are cheaper than the original times in two, and as for the quality, then the reviews are divided. But besides Trialli, there are some of the most frequently chosen.

    Manufacturer.Article.Price, ruble.
    Trialli 0.5.AG05365 – right AG05164 – left
    BSG.BSG16300010 – left
    BSG16300011 – right
    Bort 2.8.G22556007R – right-w
    ing G22556007L – left

    Chevrolet Captiva C100 rear shock absorbers

    When selecting rear shock absorbers on the C 100, it should be taken into account that on this car they have two types: the usual two-tube and shock absorber with automatic level adjustment (in the people “thick”). The second-type automatic shock absorbers were installed on the seven-seater Chevrolet Captiva. The road clearance of such a car is established depending on its congestion. Left and right shock absorbers are the same. The original numbers and sizes are listed below in the table.

    Original numbers of the captiva rear shock absorbers in the C100.
    Article.Car / Motor.Stock diameter, mm.The diameter of the case, mm.Length in a squeezed state, mm.Length in a compressed state, mm.The stock’s work flow, um.
    Regular shock absorber, L26 trim.
    regular shock absorber, LC,LD,LF,LF, LG26.
    regular shock absorber, TRIM LE26.
    automatic adjustment shock absorber, L26, (1ST DES).
    automatic adjustment shock absorber, L26, (2ND DES).
    automatic shock absorber, LC,LD,LF,LG26.
    automatic shock absorber, LE,LF, LG26 conventional shock absorber, LC,LD,LF,LG26.

    Similar rear shock absorbers on the Chevrolet Captiva C100

    The average life of the rear shock absorbers is similar to the front about 50,000 km. Among motorists as a replacement quite often used original rear shock absorbers with light support – Mando A47403.It is worth noting that the rear shock absorbers with automatic adjustment of the road clearance is much more expensive than usual.

    The analogues of the front shock absorbers number on Captiva.
    Manufacturer.Article.Price, ruble.
    Trialli 0.5.AG05510 (regular).
    Mando 2.9.A47403 (automatic).
    FARO.SAA030C016.

    What shock absorbers on Captiva with the body of the C100 to put

    When the factory shock absorbers break down, the owner of the car raises the question of a suitable replacement for his car. To answer this question unmistakably, you need to determine the goals for which you will operate the car. If you need a car to move around the city, then the standard original racks you will be enough. In this case, it is worth paying attention to similar gas and oil shock absorbers from famous manufacturers such as: Kyb,GM, Mobis and others.

    If there is a need to carry heavy loads often, then it is better to install self-regulating shock absorbers, which will not allow it to sit. One of the negative aspects will be that the empty car will not be quite comfortable to move around, but if you decide to buy self-regulating racks, the most suitable will be shock absorbers from the firm Mando.

     

    The second-generation Chevrolet Captiva C100 was produced from 2006 to 2011. We were going to car in eight countries. This five-door crossover is built on the GM Theta platform. Since the weight of the car in the top trim reached two tons – the load on shock absorbers is not small, you often have to wonder about their selection.

    Chevrolet Captiva front shock absorbers

    The front shock absorbers on the Chevrolet Captiva in the body of the C100 are not difficult to pick up, in the original they had several numbers, depending on the country where the car was officially supplied, and trim. Also, the front shock absorbers have a split on the left/right.

    Original numbers and the size of Captiva’s front shock absorbers in the C100
    ArticleCar / MotorStock diameter, mmHull diameter, mmLength in a squeezed state, mmLength in compressed state, mmStock work, mm
    LeftRight
    LC, LD, LF, LG26, for Korea
    LC, LD, LF, LG26, for Europe
    L26, for Australia

    Analogs of front shock absorbers on the Chevrolet Captiva C100

    The original shock absorbers have not proved themselves very, on average the resource is enough for 50,000 km. As a replacement, it is quite common to find on the market shock absorbers manufacturer Trialli, they are cheaper than the original times in two, and as for the quality, then the reviews are divided. But besides Trialli, there are some of the most frequently chosen.

     

    ManufacturerArticlePrice, ruble.
    TrialliAG05365 – right
    AG05164 – left
    BSGBSG16300010 – left
    BSG16300011 – right
    BortG22556007R – right-wi
    ng G22556007L – left

    Амортизатор Trialli AG05365.

    The GM 95948812 Shock absorberWhen selecting rear shock absorbers on the C 100 should be taken into account, they have two types for this car: the usual two-tube and shock absorber with automatic level adjustment (in the people “thick”). The second-type automatic shock absorbers were installed on the seven-seater Chevrolet Captiva. The road clearance of such a car is established depending on its congestion. Left and right shock absorbers are the same. The original numbers and sizes are listed below in the table.

    Original numbers of captiva rear shock absorbers in the C100
    ArticleCar / MotorStock diameter, mmHull diameter, mmLength in a squeezed state, mmLength in compressed state, mmStock work, mm
    Conventional shock absorber, L26 trim
    conventional shock absorber, LC,LD,LF,LF, LG26
    regular shock absorber, TRIM LE26
    automatic shock absorber, L26, (1ST DES)
    automatic shock absorber, L26, (2ND DES)
    automatic shock absorber, LC,LD,LF,LG26
    automatic shock absorber, LE,LF, LG26regular shock absorber, LC,LD,LF,LG26

     

    Similar rear shock absorbers on the Chevrolet Captiva C100

    The average life of the rear shock absorbers is similar to the front about 50,000 km. Among motorists as a replacement quite often used original rear shock absorbers with light support – Mando A47403.It is worth noting that the rear shock absorbers with automatic adjustment of the road clearance is much more expensive than usual.

     

    Analogs of front shock absorbers on Captiva
    ManufacturerArticlePrice, ruble.
    TrialliAG05510 (regular)
    MandoA47403 (automatic)
    FAROSAA030C016

    Trialli AG05510 shock absorber.

    The Mando A47403 shock absorber When the factory shock absorbers break before the owner of the car raises the question of a suitable replacement for his car. To answer this question unmistakably, you need to determine the goals for which you will operate the car. If you need a car to move around the city, then the standard original racks you will be enough. In this case, it is worth paying attention to similar gas and oil shock absorbers from famous manufacturers such as: Kyb,GM, Mobis and others. If there is a need to carry heavy loads often, then it is better to install self-regulating shock absorbers, which will not allow it to sit. One of the negative aspects will be that the empty car will not be quite comfortable to move around, but if you decide to buy self-regulating racks, the most suitable will be shock absorbers from the firm Mando.

    Subscribe to our channel in Yandex.ZenEMore more useful tips in a convenient format Subscribe See alsoNot found the answer to your question?

    Ask in the comments. We’ll answer for sure! Popular instructions for repairing Chevrolet Captiva I

    This part for Chevrolet Captiva cars is made in different parts of the world. The site has reviews of shock absorber manufacturers from countries such as: USA, Belgium, South Korea. In December 2019, three manufacturers took part in the Chevrolet Captiva shock absorber rating on PartReview. It is built on the basis of 3 recalls and 10 votes.

    Which shock absorbers to choose for Chevrolet Captiva?

    Last month, PartReview users opted for GENERAL MOTORS. 30% of positive votes belong to this manufacturer. In second place were the Miles shock absorbers – 0%. Closes the top three firm Kortex with a result of 0% of the vote. In the overall rating of shock absorbers, which takes into account the opinions of owners of different brands and models of cars, these brands take such positions:

    1. GENERAL MOTORS has not yet been able to collect enough reviews to participate in the ranking. Adding a recall (indicating your car) will help this manufacturer get into the rating.
    2. Miles finished 15th, with a PR rating of 66. Based on 3 reviews and 120 votes.
    3. Kortex – has insufficient reviews to participate in the ranking.

    Other parts for Chevrolet Captiva

    Finding out what shock absorbers prefer to put owners of Chevrolet Captiva, you can see other popular parts for this car. In December 2019, PartReview led the lead:

    Manufacturer:KYBJapan Article:335844 Installation side:front bridge on the right Shock absorber system:two-tube View shock absorber:gas pressure View shock absorber:shock absorber rack

    Manufacturer:KYBJapan Article:335845 Installation side:front bridge left Shock absorber system:two-tube View shock absorber:gas pressure View shock absorber:shock absorber rack

    Manufacturer:KYBJapan Article:345084 Installation side:rear bridge shock absorber system:two-tube View shock absorber:gas pressure Gas Mode of fastening shock absorber:upper hole The shock absorber attachment:lower hole

    Manufacturer:STELLOXChina Article:4203-9617-SX Installation Side:rear bridge View shock absorber:gas pressure View shock absorber:shock absorber Mode of fastening shock absorber:upper hole Running part:for cars without elevated Road Clearance Mode of fixing shock absorber:lower hole Shock system:two-tube Manufacturer:OPTIMALGermany Article:A-3941G View of the shock absorber:Gas Pressure Chassis:for cars with standard running part of the installation side: Rear Bridge Equipment/Equipment:for cars without a road clearance system The shock absorber attachment:Upper hole The shock absorber attachment:lower hole Shock absorber system:two-tube Manufacturer:MONROEEuroUnion Article:D0409 Shock absorber system:two-tube View shock absorber:gas shock absorber:

    Manufacturer:MONROEEuroUnion Article:D8079 Shock absorber attachment:Upper hole Shock absorber attachment:lower hole Shock absorber system:two-tube View shock absorber:gas pressure

    Manufacturer:LYNXautoJapan Article:G121042LR Installation Side:rear bridge shock absorber system:two-tube View shock absorber:gas pressure Gas Mode of fastening shock absorber:upper hole Manufacturer:NIPPARTSHolland Article:N5520912G View of shock absorber:gas pressure Gas Mode of fixing shock absorber:upper hole The method of fixing the shock absorber:lower hole

    Manufacturer:PATRONBelarus Article:PSA335844 Installation:front bridge on the right Shock absorber system:two-tube View shock absorber:gas pressure View shock absorber:the shock absorber rack Manufacturer:PATRONBelarus Article:PSA335845 Side Installation:Front bridge left Shock absorber:two-tube View shock absorber:gas pressure View shock absorber:STAND shock absorber Manufacturer:BENDIXGermany Article:062291GB View shock absorber:gas pressure Running part:for cars with Standard chassis Installation Side:Rear Bridge Shock absorber system:two-tube Shock erastometer attachment: Upper hole

    Sources:

    Поделиться: